Our Catalog

Car Audio & Video

Driver Safety & Security

Marine & Powersports

Car Accessories

Shop Now

Electronics

Add-Ons

Car Cameras

Car Audio Packages

Marine Receivers

Marine Speakers

Warranties

Audio

Car Lighting

Car Amplifiers

Radar Detectors

Audio & Video Accessories

Car Signal Processors & Crossovers

Marine Amplifiers

Marine Subwoofers

Car Alarms & Remote Starts

Car Speakers

Car Receivers

Car Hands Free

Satellite Radio Add Ons

Marine Accessories

Car Subwoofers

Car Speaker Boxes and Enclosures

ATV/UTV Speakers

Car DVD Players

ATV/UTV Subwoofers

ATV/UTV Accessories

Car Speaker Powered Enclosures

Overhead DVD & Video

Mono Subwoofer Amps

Windshield Radar Detectors

3.5" Car Speakers

Car CD Receivers

LED Light Bars

Up to 8" Subwoofers

Car Alarms

Back-Up Cameras

Car Speaker Loaded Enclosures

4" Car Speakers

Dash Cameras

Bluetooth Hands Free Kits

Car DVD Receivers

10" Car Subwoofers

Car Digital Sound Processors

Car GPS Navigation Receivers

Car Keyless Entry

Audio Accessories

Headrest DVD & Video

4" x 6" Car Speakers

Stand Alone Monitors

Car Lighting Accessories

4-Channel Amps

Car Remote Starts

5.25" Car Speakers

Car Digital Media Receivers

LCD Rearview Mirrors

5+ Channel Amps

12" Car Subwoofers

Receivers & Amplifiers

Car Alarm with Remote Start

5" x 7" Car Speakers

Car Satellite Radio Receivers

13"+ Car Subwoofers

Car Security Accessories

6.5" Car Speakers

6" x 8" Car Speakers

6" x 9" Car Speakers

Additional Car Speaker Sizes

Tweeter Car Speakers

Extra Car Remotes

Car Sirens

Speaker Stands & Mounts

Preamplifiers

Audio Component Parts

Car Impact Sensors

Car Tilt Sensors

Car Motion Sensors

Audio Express

 | Audio Express | Western United States

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Default Header After Global Promotions

Alpine understands the importance of bass for the car audio enthusiast while keeping it budget-friendly at the same time.

Alpine® W Series 10" Bass Subwoofers-W10S4

Polypropylene and mica cone with poly-foam surround

Recommended Sealed box volume: 0.83 cu. ft

Recommended Ported box volume: 1.51 cu. ft

The 2017 BASS subwoofers are engineered to be fun and loud in a budget friendly category by combining retro styling with enough efficiency to run on 250W RMS.

An optimized magnet circuit allows more focused magnetism in the gap which results in improved efficiency. This means tighter bass control and more output!

Built on JL Audio's patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters).

JL Audio® 10" Subwoofer Driver-10TW1-4

Built on JL Audio's patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design.

JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 using a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs.

The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth.

Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system.

Very shallow mounting depth (4.36 in / 111 mm)

No pole vent: permits mounting close to rear wall of enclosure

Extremely small sealed enclosure volume requirements

Long linear excursion capability (0.40 in / 10 mm, one-way)

Patented "floating cone attach method" technology

Cast alloy frame with flat edges for tight driver grouping

Injection molded, mica-filled polypropylene cone

Steel mesh grille included with each driver

Precision-built in USA at JL Audio’s Miramar, Florida factory with global components

Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability.

JL Audio® 10" Subwoofer Driver-10TW3-D4

TW3 10-inch Subwoofer (400 W, dual 4 O voice coils)

Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of greater excursion than the W3v3’s.

To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.

TW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing Subwoofers.

Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.

Very shallow mounting depth (3.25 / 3.50 Inches)

No pole vent: permits mounting close to rear wall of enclosure.

Very small sealed enclosure volume requirements

Very long linear excursion capability (0.60 In / 15.2 mm, one-way)

Patented “floating cone attach method” technology

Aluminum-alloy dust cap and rear cap with JL Audio logo

JL Audio® 10" Subwoofer Driver-10TW3-D8

TW3 10-inch Subwoofer (400 W, dual 8 O voice coils)

The 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class.

JL Audio® 10" Subwoofer Driver-10W0v3-4

The 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.

The 10W0v3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a compact 0.65 cu. ft. (18.4 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

Recommended Amplifier Power (RMS): 75 - 300 W

This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications.

JL Audio® 10" Subwoofer Driver-10W3v3-4

This acclaimed Subwoofer strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.

The 10W3v3-4 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.125 cu. ft. (31.9 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

Recommended Amplifier Power (RMS):	150 - 500 W

If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3 is the ultimate choice.

JL Audio® 10" Subwoofer Driver-10W6v3-D4

W6v3 10-inch Subwoofer (600 W, dual 4 O voice coils)

If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3 is the ultimate choice. This advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance.

The 10W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.

Greater excursion capability and higher power handling distinguish it from our 10W3v3 10-inch Subwoofer, allowing for higher output. Dual 4 O voice coils permit deploying the W6v3 as a 2 O or 8 O driver.

The KFC-XW1041 has a robust thermal management system implemented. with an Aluminum Bobbin,Closed Yoke Design, and Advanced Airflow Control.

Kenwood KFC-XW1041 10" Subwoofer-KFC-XW1041

PP X-motif Cone with Diamond Array Pattern

Closed Yoke with Advanced Airflow Control

X-Motif Cone controls resonance frequency and cuts unnecessary frequency, delivering powerful and solid bass response.

Computer-optimized damper controls stress and increases mechanical durability.

Classic KICKER® Comp® Subwoofers give you incredible performance at an outstanding value.

Kicker® Comp 10" 4-Ohm Subwoofer-43C104

The 2016 Comp Subwoofers give you deep bass and a great value.

Huge value. High performance. The KICKER® CompC™ Subwoofer pumps out the bass with all the intensity your ears can handle.

Kicker® CompC 10" 4-Ohm SVC Subwoofer-44CWCS104

CompC Subwoofers are equipped with stamped steel frame construction, inheriting elite innovations for world-class KICKER power, durability and hard-hitting, high-performance bass.

The KICKER CompQ™ Subwoofer delivers on all of the power, capacity and performance of its square counterpart L7™, only utilizing a round basket and cone.

Kicker® CompQ 10" 2-Ohm DVC Subwoofer-42CWQ102

The CompQ 10” Subwoofer is a perfect selection for strong, tight bass that deliver unparalleled accuracy, with extremely musical bass.

An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion.

The CompQ 10-Inch Subwoofer works best with a sealed or ported enclosure with 700 watts of recommended power. See below for more details.

Kicker® CompR 10" Subwoofer-48CWR102

The CompR 10-Inch Subwoofer is a 2O dual voice coil design, making it easy to get the most out of your amp.

An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion. To make our subs even more reliable, KICKER engineers developed Forced Air Cooling to help our subs run 25% cooler.

The CompR 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.

Now even more efficient and sporting a slick, blacked-out look, the 2021 CompR® sub is the very model of power and reliability. The CompR 10-Inch Subwoofer is a 2O dual voice coil design, making it easy to get the most out of your amp.

Kicker® CompRT 10" Subwoofer-48CWRT102

The CompRT 10-inch Subwoofer is an all-weather thin subwoofer with a pair of 2-Ohm voice coils. With a mounting depth under four inches and plenty of power handling, this go-anywhere sub is as flexible as it is powerful. A UV-resistant cone and surround help make the CompRT sound great wherever the road (or trail) takes you.

It takes serious know-how for a thin subwoofer to deliver super-deep bass. Our signature red double stitching makes an outstanding bond between the improved Santoprene surround and polypropylene woofer cone. With our custom SoloKon™ technology and the CompRT’s unique framework, the sub sounds fat – but keeps it thin! To make our subs even more reliable, KICKER engineers developed Forced-Air Cooling™ to help our subs run 20 percent cooler than before.

The CompRT 10-inch Subwoofer works best with a sealed enclosure and 400 watts of recommended power. See below for more details.

The CompRT line of ultra-thin subwoofers fits under your seat or behind your back bench with ease. Now even more efficient and sporting a slick, blacked-out cone, the CompRT® gives you all the bass in very little space!

The L7 stands alone as the most unique subwoofer on the market, with a cone shape that is exclusively designed to produce more output.

Kicker® L7 10" 4-Ohm DVC Subwoofer-41L7104

The KICKER L7™ Subwoofer again reaches new heights in technology and design, capturing the imaginations of 2015 CES® Innovation Award judges and solidifying itself as the crown jewel among industry subwoofers. For more than a decade, KICKER’s square woofer earned numerous awards including several CES accolades, and the 2015 version once again makes distinctive improvements on its way to another honor.

The L7R Square Sub moves more air, so you get more bass. The design was invented right here in Stillwater, Oklahoma – made to deliver unprecedented efficiency and huge volume!

Kicker® L7R 10" 2-Ohm DVC Subwoofer-45L7R102

Our square subs deliver more cone area. That means we deliver more bass, yet require no more air space than a standard round sub.

The only thing thin about the L7T thin subwoofer is the mounting depth. These tough subs work perfectly in nearly anything with a motor.

Kicker® L7T 10" 2-Ohm DVC Subwoofer-46L7T102

The L7T 10-inch Subwoofer is a true-bass, thin subwoofer with a pair of 2O voice coils.

SoloKon™ technology uses an injection-molded polypropylene cone and 360-degree back bracing as a single solid unit - both cooling the motor and eliminating distortion. Patented ribbed corners are incorporated into the high-roll Santoprene® surround to move smoothly under high SPL. We then stitch the cone to the surround, providing an additional level of integrity that thrives no matter the application.

Match any L7T thin sub with a KX-Series mono amplifier for an outstanding combination of power and size.

Square Sub Design Moves 20% More Air Than Round Subwoofers

Ribbed Santoprene Surround Resists Heat And Degrading

Bumped Top Plate For More Excursion & Smoother Performance

SoloKon™ Cone With 360-Degree Back Bracing

UniPlate™ Solid Pole Piece & Backplate For Excellent Heat Dissipation

At the very first glance, it appears what the new Q subwoofers are designed for. The solid aluminum diecast baskets with diamond cut as well as the massive triple ferrite magnet systems clearly signalize that these subwoofers really mean it. The extremely

Helix Q 10W 10" Subwoofer-Q10W

At the very first glance, it appears what the new Q subwoofers are designed for. The solid aluminum diecast baskets with diamond cut as well as the massive triple ferrite magnet systems clearly signalize that these subwoofers really mean it. The extremely stiff, hand-scooped cones and oversized voice coils with enormous winding height are literally predestinated to turn incredible volumes of air into deep bass sounds.

Yet sheer power alone is not sufficient – numerous sophisticated technical details together with a smart mix of materials assure highest precision and detailed bass reproduction which will satisfy even most demanding music enthusiasts.

These subwoofers form a perfect symbiosis of maximum sound pressure and state-of-the-art sound quality in a new dimension.

Extremely rigid non-pressed paper cone for maximum stiffness

Wide low-loss foam surround for maximum cone excursions

Concave PP dustcap with embossed HELIX logo

2 x 2 Ohms impedance allows most flexible configuration

High-temperature dual voice coil with enormous winding height for outstanding linear excursion

Rock-solid diecast basket with diamond cut

Rugged butyl magnet cover with HELIX lettering for perfect magnet protection

Solid push terminals for large wire gauge

10" Car Subwoofers

Alpine® W Series 10" Bass Subwoofers-W10S4

JL Audio® 10" Subwoofer Driver-10TW1-4

JL Audio® 10" Subwoofer Driver-10TW3-D4

JL Audio® 10" Subwoofer Driver-10TW3-D8

JL Audio® 10" Subwoofer Driver-10W0v3-4

JL Audio® 10" Subwoofer Driver-10W3v3-4

JL Audio® 10" Subwoofer Driver-10W6v3-D4

Kenwood KFC-XW1041 10" Subwoofer-KFC-XW1041

Kicker® Comp 10" 4-Ohm Subwoofer-43C104

Kicker® CompC 10" 4-Ohm SVC Subwoofer-44CWCS104

Kicker® CompQ 10" 2-Ohm DVC Subwoofer-42CWQ102

Kicker® CompR 10" Subwoofer-48CWR102

Kicker® CompRT 10" Subwoofer-48CWRT102

Kicker® L7 10" 4-Ohm DVC Subwoofer-41L7104

Kicker® L7R 10" 2-Ohm DVC Subwoofer-45L7R102

Kicker® L7T 10" 2-Ohm DVC Subwoofer-46L7T102

Helix Q 10W 10" Subwoofer-Q10W

Infinity® Kappa 103WDSSI Black 10" Car Subwoofer-INFSUBKA103WDSSIAM

CHECK OUT OUR SPECIALS PAGE FOR DEALS!

SHOP

SOLUTIONS

INFO

CONTACT US

STORE HOURS

HOLIDAY HOURS

Connect with Us

Payment Methods

Translate