Audio Express
JL Audio® 700 W 5 Ch. Class D Marine System Amplifier
$899.99
At a Glance
The M700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel.
Proposition 65 Warning for California Residents
General Specs
| Color | White |
|---|---|
| Depth (in.) | 7.09 |
| Width (in.) | 10.23 |
| Height (in.) | 2.05 |
| Amplifier Class | Class D |
| Amplifier Output (Watts) | 700 |
| Bluetooth Capable | No |
| Amplifier Channels | 5 |
| Impedance | 2 - 4 Ohms |
| Manufacturer Warranty | 2 Year |
| RMS Power Handling (Watts) | 300 |
| Water Resistant | No |
| Digital Input | No |
| Shallow Mount | No |
| Speaker Level Input | No |
| Number Of Outputs | 6 |
| Minimum Impedance Unbridged | 2 Ohm |
| Number Of Inputs | 3 |
| Product Weight (lbs.) | 6.15 |
JL Audio® 700 W 5 Ch. Class D Marine System Amplifier
Model #: M700/5
$899.99
At a Glance
Get to know this product.
The M700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and it fits comfortably in just about any boat's weather-tight compartments. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 O), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design.
The M700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer channel level or overall level can be directly controlled from a remote location.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
75 W x 4 @ 4 O + 300 W x 1 @ 2 O - 14.4V
White and gray powder-coat finishes
Gasketed cover for the controls and stainless steel hardware
Useful Documents
Proposition 65 Warning for California Residents