JL Audio XD400/4V2 4 Ch Amp
The JL Audio XD400/4V2 is a 4 Ch Amp Class D Full-Range with 100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω – 14.4V. This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its four channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency. Use the JL Audio XD400-4V2 in combination with our XD600/1 monoblock to build a 1000 W amplification system to power four satellites and a subwoofer… and fit the whole thing under a seat. Or, use the JL Audio XD400-4V2 4 channel amplifier by itself to power two satellites, plus a subwoofer. With XD’s, the possibilities are endless. The JL Audio XD400-4V2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The JL Audio XD400-4V2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier’s level can be directly controlled from the driver’s seat. This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
|Filters||Low-Pass or High-Pass, 50 Hz - 500 Hz|
|Power Handling||100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω - 14.4V|
|Frequency Response||12 Hz - 22 kHz (+0, -1dB)|
|Dimensions||Height (H) 2.05 in / 52 mm, Width (W) 8.52 in / 216 mm, Depth (D) 7.09 in / 180 mm|