JL AUDIO XD700/5V2 5 Ch Amplifier
The JL Audio XD700/5V2 5 ch amplifier is ideal for a complete audiophile-grade, subwoofer four satellite system, and it fits comfortably in just about any vehicle. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD™ switching design. The JL Audio XD700/5V2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier’s filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An “x10″ multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. The JL Audio XD700/5V2 5 channel amplifier also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier’s level can be directly controlled from the driver’s seat. This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
|RMS Power||75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V|
|Frequency Response||(Main Channels) 12 Hz - 22 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB)|
|Dimensions||Height (H) 2.05 in / 52 mm, Width (W) 10.23 in / 260 mm, Depth (D) 7.09 in / 180 mm|